Pease visit our new home page:

23.04.2011 Great track using TAL-Reverb-3

A track by Bjporter that uses a lot TAL-Reverb-3:


12.04.2011 MidiMe and TAL-Elek7ro demo video

MidiMe IPad controller used with TAL-Elek7ro demo:

08.04.2011 TAL-Vocoder-2 0.2 beta


Release of TAL-Vocoder-2 Version 0.2 beta. TAL-Vocoder is a vintage vocoder emulation with 11 bands that emulates the sound of vocoders from the early 80s. 
  • 11 band vocoder engine.
  • Internal carrier synth (pulse, saw, sub osc, noise, mono, poly, portamento, sync mode, tune).
  • Possiblity to route an external carrier signal.
  • Harmonic control (adds more harmonics to any carrier signal)
  • "Ess" enhancer for a clean understandable voice, also with a carrier that hasnt much high frequencies.
  • Clip LED, glows if the input signal will be clipped.
  • Panic button stopps hanging notes within the synth.
  • Documentation shows different routing possiblities.
  • Low CPU usage.

04.03.2011 TAL-NoiseMaker 3.06 release


Release of TAL-NoiseMaker Version 3.06. A second fix to avoid crashes on some systems while loading presets on some systems.
  • Crash on some hosts and systems while changing presets fixed (Version 3.06).

13.04.2011  TAL-Reverb-II relaunch

TAL-Reverb-II is the most popular TAL-Reverb. After some user feedbacks had to release TAL-Reverb-II again. It combines the retro sound of TAL-Reverb-I with additional features. Version 1.61 has some small improvements in the internal modulation algorithm.

- Improvements in the internal modulation algorithm (version 1.61)

13.04.2011  TAL-NoiseMaker 3.04 for Linux by KXStudio

KXStudio developer releases TAL-NoiseMaker 3.04 for Linux.

Download the newest version of the TAL plugin bundle for Linux:

08.03.2011  TAL-NoiseMaker meets Team Banzai

Team Banzai:
"A recent track of ours uses Noisemaker for the majority of the

"The low end of that synth blows every other VST out of the water."

Uses 3 TAL Noisemakers, 1 TAL Elek7ro II, a few TAL Reverb IIs, and a few TAL Bitcrushers:

04.03.2011 TAL-NoiseMaker 3.04 release


Release of TAL-NoiseMaker Version 3.04. 
  • Crash on some hosts and systems while changing presets fixed (Version 3.04).

28.02.2011 TAL-NoiseMaker 3.03 release


Release of TAL-NoiseMaker Version 3.03. This release includes several new features people asked for and 128 new presets by Frank "Xenox" Neumann / Particular - Sound FN, The Unshushable Coktor TUC, Alexandra Sendy AS, and TAL. 
A vintage type delay, preset load and save support for simple preset exchange and full automation support are the main features added. We also added a filter drive effect that directly affects the 4x oversampled filter. The envelope editor has new one shot and constant bpm options that are useful for drum and percussion sounds.

  • Vintage delay added (version 3.03).
  • Filter overdrive (version 3.03).
  • Own preset save and load functionality for preset exchange (version 3.03).
  • Osc 2 noise waveform added (version 3.03).
  • LFO 1/2, OSC 1&2 modulation support (version 3.03).
  • Full automation support. Drop downs also compatible with VST automation (version 3.03).
  • Changes in the preset management, single preset support (version 3.03).
  • Envelope Editor: Fix tempo option added (version 3.03).
  • Envelope Editor: One shot option added (version 3.03).
  • Envelope Editor: Reset button (version 3.03).
  • 256 presets by Frank "Xenox" Neumann / Particular - Sound FN, The Unshushable Coktor TUC, Alexandra Sendy AS, Patrick Kunz TAL (version 3.03).
  • Small volume correction in the 24 dB filter at high cutoffs and full resonance (version 3.03).
  • Compatible with older presets (version 3.03).

14.02.2011 Tune made with TAL-Elek7ro

Great song made by Daniel English feat. Nicky D. All sounds apart from the snare are made with TAL-Elek7ro. Enjoy it :)

Abduct me by Daniel Englisch feat. Nicky D.:

04.01.2011 TAL-Reverb 3 version 0.96


Release of TAL-Reverb-IIITAL-Reverb-III is an easy to use stereo plate plugin. Its the replacement for TAL-Reverb-II and has several improvements as an optimized GUI and some changes in the algorithm. It has a simpified EQ section, a meter display and shows actual slider values. The reverb has its own character and produces a very diffuse plate. I tried to create a colorless and maximal diffuse plate reverb without grains and digital artefacts. Its the result of a lot tuning and testing. Following samples shows how it sounds:


  • Plate reverb sound.
  • One simple room size control.
  • Predelay up to one second.
  • EQ section (12dB cut, low shelf filter at 1000Hz, high shelf filter at 200Hz)
  • Stereo width control (from full stereo to mono).
  • Stereo input mode (mono or stereo intput).
  • Displays the slider value of the active fader.
  • A meter shows the output volume.
  • 10 factory presets
  • Made with the juce framework and open source.

03.12.2010 TAL-Reverb 1.60


Release of TAL-Reverb-2 version 1.60. Slightly improved algorithm. The overal sound does not change.
  • Slightly improved algorithm (smoother sound, reduced hearable modulation).

30.11.2010 Linux port

The developer of kxstudio compiled / ported all juce based tal plugins as 32 and 64 bit for linux.

Download link:

Included plugins 32/64bit:
  • TAl-Dub-3
  • TAL-NoiseMaker
  • TAL-Filter
  • TAL-Filter-2
  • TAL-Reverb
  • TAL-Reverb-2

Thanks a lot!

29.11.2010 TAL-NoiseMaker Release 2.57


Release of TAL-NoiseMaker version 2.57. Midi Learn fixed.

  • Midi Learn fixed (version 2.57).

16.11.2010 TAL-Filter-2 verison 1.00 released


Release of TAL-Filter-2 version 0.99b. TAL-Filter-2 is a host synced filter module with different filter types, panorama and volume modulation possibilities. The device includes all 4x oversampled TAL-NoiseMaker filters: LP 24 dB, LP 18dB, LP 12dB, LP 6dB, HP 12 dB, BP 12dB, N 12 dB. Its possible to saturate / distort the input signal by raising the input volume with the input control (only if you use a filter as modulation type).
Its also possible to modulate the panorama or volume of an incoming signal. This can be used for tremolo or trance gate effects. Panorama modulation maybe is useful to pan your percussion, hats or sound effects in the stereo room for more interesting rythms and sounds. 
  • Create host / beat synced modulations.
  • Easy to use graphical editor (double click deletes points, a click adds one).
  • 4x oversampled TAL-NoiseMaker filters.
  • Different filter types: LP 24 dB, LP 18dB, LP 12dB, LP 6dB, HP 12 dB, BP 12dB, N 12 dB.
  • Its possible to saturate / distort the input signal by raising the input volume (only for filters).
  • Panorama modulation (-3dB).
  • Volume modulation.
  • Different modulation tempo (x1, x2, .. x32).
  • Depth control as a simple way to control the modulation intensity.
  • Free as always ;)

Version 1.00 includes following improvements:
  • Automation from 0..1 fixed,  knobs and drop downs only (Version 1.00).
  • Control surface support added, knobs only (Version 1.00).

27.10.2010 TAL-Reverb 1.00


Release of TAL-Reverb-2 version 1.00. Slightly improved algorithm. The overal sound does not change.
  • Slightly improved algorithm.

05.11.2010 TAL-NoiseMaker Release 2.56


Release of TAL-NoiseMaker version 2.56. This release should increase the compatibility and includes changes in GUI handling, because of compatibility reasons. It wasnt possible to to scale the plugin size without flicker and other repaint issues within some hosts. Support of All Notes Off should avoid hanging notes while stopping some hosts. This release fixes also some memory leaks while closing the plugin.
  • Changed GUI handling for compatibility reasons within some hosts (version 2.56).
  • All notes off added (version 2.56).
  • Other small bugfixes (version 2.56).

25.10.2010 TAL forum created

For better support and as a knowledge base we created a company forum at KVR: 

Togu Audio Line Forum at KVR

22.10.2010 TAL-Bassline presets by Joel Bisson (Synthetic Illusion)

TAL-Bassline VST-Presets that were Programmed by Joel Bisson at Synthetic Illusion@Blogspot.com:

09.Dark Bass_-_01
12.New Wave_-_01
14.Saw Wave_-_01


15.10.2010 TAL-NoiseMaker Release 2.50


Release of TAL-NoiseMaker version 2.50. Fixes some important issues:
  • Fixes a problem that leads to a gui halting with a lot instances on some systems (version 2.5).
  • Other small bugfixes (version 2.5).

26.09.2010 TAL-NoiseMaker Release 2.00


Release of TAL-NoiseMaker version 2.00. Version 2.0 includes some big extensions as an envelope editor, a resizable GUI, a vintage noise control and several bugfixes. Presets are compatible with version 1.x:
  • Graphical envelope editor with several destinations (Filter, Osc2, Osc2, Osc 1&2,  FM, Ringmod, Volume).
  • New resizable tab UI.
  • Vintage noise control.
  • Osc waveforms as ComboBoxes.
  • Full compatibility with existing presets of version 1.x.
  • Other bugfixes.

23.08.2010 TAL-Reverb 64 bit Audio Unit release

Release of TAL-Reverb-2 0.95b 64bit Audio Unit.

  • 64 bit Audio Unit released.

22.08.2010 TAL-NoiseMaker Release 1.08, fixed OSX 10.5 VST bug


Release of TAL-NoiseMaker version 1.08b. Didnt make a new version number for this, as it fixes just a OSX 10.5 compatibelity issue with the VST Version of the plugin.

  • OSX 10.5 VST bug fixed (22.08.2010).
New great demo tracks added:

Demo tune by Bastiaan b4rth.com with following set up:
  • 19 Noisemaker plugins
  • The ReverbII 1 time
  • The Vocoder 1 time
  • Two DUBIII delays.

80's demo tune from an anonymous user:

14.08.2010 Demot tunes added / Factory presets in Audio Unit format

Great TAL-NoiseMaker demo tune by Bastiaan b4rth.com with following set up:
  • Renoise 2.5 as sequencer.
  • Renoise buscompressor on the master channel (only slightly)
  • 16 instances of your excellent plugin: NoizeMaker v1.03b.
  • TAL Dub III delay plugin 3 times. (on 3 noizemaker instruments directly) (so no send configuration)

TAL-Elek7ro demo tune by Kent Sandvik:
  • All synth sounds made with TAL-Elek7ro.

TAL-NoiseMaker presets as Audio unit presets by Brian:

14.08.2010 TAL-NoiseMaker Release 1.06


Release of TAL-NoiseMaker version 1.06b. Following issues fixed:
  • Memory leak while playing fixed 1.06
  • Small bugfixes 1.04
  • Midi Map saving not work.
  • Control Surface support for Audio Units, for all sliders.
  • Other bugfixes.
Known issues i'm working on:
  • VST / MAC OSX fails on some systems.
  • VST plugin problem on some systems (rtas wrapper, audio just on one channel on some systems)
  • Problem while playing with 6 voices (fix will be included in the next release)

03.08.2010 TAL-NoiseMaker Release 1.02


Release of TAL-NoiseMaker version 1.01b. A virtual analog synth with built in chorus and reverb effects and a lot of modulation possibilities.

  • Portamento "On" fixed, version 1.02b
Known issues i'm working on:
  • Issue with PPC
  • Issue with OSX < 10.6
  • Controller Surface in OSX

27.07.2010 TAL-NoiseMaker

Announcement of TAL-NoiseMaker. Coming soon...

FN-Tal-Noiz3m4k3r D3mosong from Frank Neumann on Vimeo.

27.06.2010 TAL-Reverb 0.95b


Release of TAL-Reverb-2 0.95b. Includes a windows 64 bit version of the plugin and some CPU optimations.
  • Windows 64 bit version release.
  • CPU optimations.

10.06.2010 Video by aurex 

Great video by aurex that shows TAL plugins in action.

"..every synth sound and every effect is done by a TAL plug-in.. I didn't use any external FX, EQ or compression so what you hear is what you get. The raw TAL sound. "

Watch the video: 



Professor Purple remix uses 3 elek7ro synths and TAL effects:


"I just wanted to tell you I'm a big fan of the TAL plug-ins - I use one of your synths or effects on every track I make. The TAL stuff is so much better than a lot of the commercial software out there!"

Daniel Lindeberg
Dumb Recordings / www.dumbdan.com

07.04.2010 Release of TAL-Elek7ro 2.70


Release of  TAL-Elek7ro Version 2.70. Improved GUI and maximal pulswidth modulation for the pulse waveform.
  • Better readable option menu text (version 2.70)
  • Wider pulse modulation, pulse waveform only (version 2.70)

29.03.2010 TAL-Reverb II v0.9b


Release of TAL-Reverb-II version 0.9b (beta). Improved delay line modulation for smoother results especially at lower frequencies. Doesnt affect the overal sound of the reverb.
  • Improved delay line modulation for smoother results.  (Version 0.9b).
Audio demo that demostrates TAL-Reverb-II without any EQ at a long decay time on different 808 drum samples:

25.03.2010 Release of TAL-Elek7ro 2.65


Release of  TAL-Elek7ro Version 2.60. Fixed some filter issues that lead to clicks in the attack phase. Also added a phase control that controls the phase of the oscillators if osc key trigger is enabled. 
  • Clicking on some systems fixed (Version 2.65).
  • Fixed rect osc phase (Version 2.61).
  • Attack clicks under some conditions fixed (Version 2.6).
  • Osc Phase control in Trigger mode (Version 2.6).

13.03.2010 TAL-Reverb II


Release of TAL-Reverb-II version 0.8b (beta), a plate reverb vst and audio unit plugin for Windows and OSX:
  • Plate reverb sound.
  • Room size / decay control.
  • Predelay up to one second.
  • 3 band subtractive EQ section (low shelf, high shelf, notch).
  • Stereo width control.
  • Stereo input mode.
  • 10 factory presets.

11.03.2010 Coming soon...


TAL-Reverb-2: improved plate algorithm, stereo input mode and a small subtractive EQ section.

07.03.2010 Windows 64 bit plugins released

Release of 64 bit plugins for windows:
There will be no 64 bit mac versions of these plugins made with the VST 2.4 GUI SDK. R.I.P. carbon library :)

Will port the plugins created with the juce framework as soon as this framework supports 64 bit, hopefully i can create OSX 64 bits of them too.

07.01.2010 Release of TAL-DUB-III v0.95b


Release of TAL-DUB-III version 0.95 beta.

  • Optimations for live sessions (no glitches while changing the delay time). 0.95b

06.01.2010 Release of TAL-Elek7ro 2.50


Release of  TAL-Elek7ro Version 2.50. This version improves the audio quality of the synth, especially for sounds > 10000Hz. To get better results, some non linear components were replaced with linear ones. Also the oversampling is increased to 4x- older versions had 2x oversampling.

Some presets maybe sound a bit different, especially self resonating sounds are louder with the new version. The previous version is still available for download for some time.
  • Improved audio quality, especially for frequncies > 10'000Hz (Version 2.5).
  • 4x oversampled filter - previous version was 2x oversampled (Version 2.5).
  • Increased self resonance volume (Version 2.5).

03.01.2010 Release of TAL-DUB-III v0.80b


Release of TAL-DUB-III version 0.80 beta. TAL-DUB-III is an easy to use delay device with some special features. Its no tape delay emulation and has its own sound. It has an alias free saturation stage, a non-linear 6dB low pass and a 3dB high pass filter that are included in the feedback path of the device. An input drive knob allows to adjust the saturation level. Pop-up menues show the current values of volume, delay-time and feedback knobs. A tab button allowing to adjust the delay time for live sessions.
  • Delay time up to 4 seconds.
  • Non linear 6dB Low-Pass filter.
  • 3dB High Pass filter.
  • Alias free stauration, adjustable with the input drive knob.
  • Delay x2 for each channel.
  • Synced delay times (1/16, 1/8, 1/4, 1/2, 1/1, 2/1 and trippled and dotted notes).
  • Pop-ups show the actual values dB (input drive, dry, wet), ms(delay), 0..2 (feedback)
  • Led-meter shows the sturation level.
  • Tab button for delay time.
  • Midi Learn for all knobs.
  • The feedback knob is especially optimized for doing infinite delays.

06.12.2009 Release of TAL-Filter 1.20 


TAL releases TAL-Filter v. 1.20. Envelope- and lfo amount parameters preset loading issue on some hosts fixed.
  • Envelope- and lfo amount parameters preset loading issue fixed (Version 1.20)

02.12.2009 "Minimal States" releases Test Tube

Both tracks uses TAL FX, especially DUB-II:


28.11.2009 Release of TAL-Elek7ro 2.10


Release of  TAL-Elek7ro Version 2.10.

  • Osc 1 issue on some systems fixed (Version 2.10)

24.11.2009 Release of TAL-Elek7ro 2.00


Release of  TAL-Elek7ro Version 2.00. Version 2.00 has a lot of changes that also affects the filter and envelope character. Therefore we decided to make a complete new version of the plugin that runs parallel to previous versions.
Important changes are the new filter types (18dB LP, 24dB LP, 24dB HP, 24 dB BP) that have a smooth warm and almost artefact free sound. We also could reduce the CPU usage.

Bugfixes / Changes:
  • Completely new filter types, 18dB LP, 24dB LP, 24dB HP, 24 dB BP (Version 2.0).
  • Completely new envelope (Version 2.0).
  • CPU optimations (Version 2.0).
  • Version 2.0 runs parallel to older versions of TAL-Elek7ro.

Thanks a lot to XenosSoundWorks for making great TAL-Elek7ro factory presets:

12.11.2009 Release of TAL-Filter 1.10 


TAL releases TAL-Filter v. 1.10. Fixes preset loading issues on some hosts.
  • Preset loading issue on some hosts fixed.

16.11.2009 - TAL-BassLine version 1.5.5 released


Release of TAL-BassLine version 1.5.5. Fixes an issue on some systems that leads to a crash of the plugin while the host initialize it at startup.

  • Crash while initializing the plugins on some systems/hosts fixed (Version 1.5.5).

12.11.2009 Release of TAL-Filter 1.00 beta


TAL releases TAL-Filter v. 1.0. Fixes some automation issues. The LFO can be triggered with MIDI NoteOn events.
  • Automation in some hosts fixed (v 1.0)
  • LFO NoteOn MIDI trigger (v 1.0)

11.11.2009 TAL-Reverb 1.11


Release of TAL-Reverb 1.11. Fixes an automation bug in some hosts, especially FL 9 and a bug that could lead to a crash on some systems. Added also a marker at 0dB for the dry and wet sliders. 
  • Fruity Loops automation issue (v 1.11).
  • Crash on some systems fixed (v 1.11).
  • 0dB marker for dry/wet (v 1.11).

10.11.2009 K&K releases "Esoesther"

New K&K tune, completely made with TAL-Plugins and NI Battery: 

02.11.2009 Logic Pro 9 Hyper Sets for TAL-Plugins


Logic Pro 9 Hyper Sets for 3 TAL synths , and 6 effect plugins:


01.11.2009 Release of TAL-Filter 0.80 beta


TAL releases TAL-Filter beta v. 0.8. TAL-Filter is a multi-mode filter device, including a High Pass, Band Pass and Low Pass filter. 
  • High Pass, Band Pass, Low Pass filter modes.
  • 4 Pole, 2 x oversampled non linear filter.
  • Lfo sync mode (full sync to host).
  • Lfo waveforms: Sinus, Triangle, Saw, Square, S&H, Noise
  • Envelope follower.
  • Input drive.
  • 10 Presets.
  • Its free :)

18.10.2009 Release of TAL-Elek7ro 1.20


Release of  TAL-Elek7ro Version 1.20. Big improvements in the included U-No-62 24dB and BassLine 18dB filters. There was an issue in the volume correction curve of this filters. The oscillators now nearly have the same volume with low and a lot resonance as in the U-No-62 and TAL-BassLine plugin.

  • Volume correction in U-No-62 and TAL-BassLine filter type fixed.
  • The plugin now always checks the current sample rate before processing a buffer.
TAL-Elek7ro with U-No-62 filter @ extreme values:

12.10.2009 Cruddy and very bedroomy track

Enjoy it :)


accidental architecture

09.10.2009 TAL / Twitter

Check it out for news and other stuff:


06.10.2009 TAL-Reverb 1.10


Release of TAL-Reverb 1.10. Input / output channel issue in fruity loops 9 fixed.
  • Fruity Loop 9 stereo input / output (1.10)
  • Update to juce 1.50

01.10.2009 eVADE releases "The Robot" EP

A lovely electronic arrangement and video by eVADE, using a lot TAL plugins :-)


by eVADE

24.09.2009 Great track by DP using TAL-Elek7ro, TAL-BassLine and U-No-62


DP (from The Netherlands):
"I used several instances of TAL-Elek7ro, TAL-BassLine and U-No-62 for giving my track the spice it needed. The plug-ins of Togu Audio Line sound very good and are great to work with!"

Check out other tunes by DP:

24.09.2009 TAL-Elek7ro user manual updated


Thanks to MiSSiONCREEP for updating and fixing the manual :)

21.09.2009 Great tracks by Joshua D. Pomeroy using some TAL plugins

Working at the Club.MP3

Joshua D. Pomeroy:
"The drums are samples running to a bus with 2 instances of Tal-Tube. I also use Tal-USE on the snare to give more snappy highs. Tal-Bassline for the bass with Tal-USE to fatten it up.
Lead synth is Tal-Elec7ro with some reverb and delay. I used P8 for the string synth and ran it through Tal-Chorus 60.
There's a cymbal loop that I used Tal-USE on to bring out more highs and turn down any sub."

Link to the music project:

18.09.2009 Release of TAL-Elek7ro 1.11 and Final release TAL-Reverb 1.00

TAL-Elek7ro 1.11


Release of  TAL-Elek7ro Version 1.11. Includes some bug fixes and the awesome U-No-62 24 dB filter and BassLine's 18 dB filter.

I'm sorry for that fast 1.11 update. Had some free time today... :) This update does not affect the overall sound of the filters, its just a little detail in the non-linear filters stages that i had to improve.
  • Improved filter sound at high resonance (sounds a little bit more analogue now). (Verison 1.11)
  • New filter types (U-No-62 24 dB, TAL-BassLine 18 dB)
  • Hanging notes in poly mode fixed.
  • Possible click at the end of long release times fixed.
  • This update does not affect old presets.

TAL-Reverb 1.00


Final release of TAL-Reverb version 1.00. This updates enhances the sound of TAL-Reverb. Thanks to all user inputs that helped to improve this plate reverb effect:

  • Wider stereo spread.
  • Improved sound at small room size.
  • Improved reverb modulation.

10.09.2009 - Blog entry about Chorus-60

Includes some interesting audio examples:


23.08.2009 - Release of TAL-Reverb v0.99


Release of TAL-Reverb version 0.98. Its the first TAL plugin thats made with the juce cross platform framework and its open source.

  • Easy to use.
  • 12 dB High- and Low-Pass filter.
  • Pre delay, up to one second.
  • Usable for a wide range of sounds.
  • Midi Learn (vst's only)
  • 10 presets.
  • open source.

21.08.2009 - TAL-Reverb

The first TAL open source plugin made with the juce framework.

Coming soon...

30.07.2009 - TAL-DUB-II V.1.55 released


TAL releases TAL-Dub-II version 1.55:

  • Fixed a major bug that could lead to a crash.
This update maybe affects the sound of your presets if you worked with an other sampling rate as 44100Hz!

19.07.2009 - The current project: TAL-Reverb

We had to read a lot of papers and already put a lot of work into this reverb effect. As always, the effect will only have few knobs for tuning and should be very easy to use (no early reflection stuff). The goal is to make a musical modeled reverb effect, that is suitable for all kind of audio material. There should be no artefacts also with short percusion sounds or peaks and the effect should use not much CPU.

A short demo mp3 with some test signals(short click, guitar, synth) and too much reverb ;) This demo shows the whole audio spectrum of the reverb without any equalizer:


coming soon...

18.07.2009 - Van Rossum Electrowerken

A great track by Van Rossum Electrowerken which uses a some TAL plugins:

Bassline: Elek7o
2nd bassline: Elek7o
(3rd bassline is from an analog yamaha CS10)


Thanks a lot for that one!

02.07.2009 - xenos presets

xenos made great factory presets for TAL-Elec7ro. 

Check out his page:

28.06.2009 - TAL-BassLine version 1.4.0 released


Release of TAL-BassLine version 1.4.0. After some user feedbacks, that the filter in version 1.1 sounded better, we had to make some changes to the filter again. 
The problem in version 1.1 was the aliasing, that occoured in the self oscillating filter(full resonance) at high cutoff frequencies with a 44100Hz sampling rate. Now we have no aliasing and a really good self oscillation filter sound, we think :)

Audio demo:

Changes in Version 1.4.0
  • Much better filter sound, especially with a lot resonance.

24.06.2008 - TAL-U-No-62 Version 1.7 released 


TAL-U-No-62 version 1.7 released. This release fixes an issue with the filter cutoff frequency and the output volume. 

Version 1.7:
  • Cutoff frequency / output volume issue fixed.

23.06.2009 - TAL-DUB-II V.1.4 released


TAL releases TAL-Dub-II version 1.4:
  •  Low frequency noise fixed.

11.06.2009 Final release of TAL-Elek7ro 1.02


Release of  TAL-Elek7ro Version 1.02. Includes a key trigger mode for oscillator 1 and 2. Useful for percussion and drum sounds. This release also includes some bug fixes and 14 new factory presets by xenos:
  • Osc 1 and osc 2 key trigger option (if one trigger is enabled, the subosc is triggered too). (1.02)
  • Filter slur while playing the first note and in program change - fixed. (1.02)
  • 14 new factory presets by xenos. (1.02)

06.06.2009 Demo Tune by Francesco

A other cool demo tune made with TAL plugins by Francesco (TAL-Elek7ro for synths + your effects: bitcrusher, Tube, DUB, DUB-II, Flanger, Phaser and Chorus-60). Only the hat and snare are not made with TAL products:


10.05.2009 TAL-Elek7ro One Synth Challange

Be a part of KVR's TAL-Elek7ro One Synth Challange:


Some pretty cool tunes - made with Elek7ro:


by Frank Neumann particular-sound.demyspace/particularsound

eVADE . seq0409.mp3
by  evade.de

21.04.2009 Final release of TAL-Elek7ro 1.01


Release of  TAL-Elek7ro Version 1.01:
  • 90 presets (54 great presets from xenos, the others from syikom and TAL)
  • Volume and panorama as modulation target of the LFO's
  • Trible and dotted LFO sync times.
  • Small issue with LFO 2 volume target fixed. (1.01)

20.04.2009 Release of TAL-Elek7ro Version 0.92, U-No-62, TAL-BassLine update


Important TAL-Elek7ro bugfixes:
  • A major bug that could crash the plugin, fixed. (0.91)
  • LFO 2 is now phase shifted by 180. (0.91)
  • Small detuning of voices in poly mode. (0.91)
  • Midi learn controlled pots dont move, fixed (0.92, Audio Unit)
We think its time to release version 1.0 very soon. Thank a lot for the feedbacks!

TAL-U-No-62 Version 1.6.0 release:
TAL-BassLine Version 1.3.0 release:
  • Improved oscillators.
  • Knobs dont move with midi learn, fixed (Audio Unit only)
TAL-Dub update:
  • Reset after stop in Logic Audio (Audio Unit).
  • Fixed delay time text.
TAL-Dub-II Version 1.2 released:
  • Fixes synced delay names and trible tempo.
  • Other small issues fixed.

14.04.2009 Release of TAL-Elek7ro Version 0.9


We are proud to announce this one:

TAL-Elek7ro is a virtual analog synth with some special features like oscillator hardsync and frequncy modulation. Including improved alias free oscillators, new developed fast envelopes and lfo's with a wide range from 0.1Hz up to 400 Hz. A free routable envelope with attack and decay is available too. This synth is useful for a wide range of sounds from percusion to deep bass sounds. 

Some features:
  • 2 oscillators with hardsync, PW and FM (saw, pulse, triangle, sine).
  • 1 sub oscillator (saw, rectangle).
  • 1 noise oscillator.
  • 18dB or 12dB non linear analog modelled low pass resonance filter.
  • Mono mode, including portamento.
  • Poly mode, up to 6 voices (not cpu optimized for poly mode).
  • 2 free routable Lfo's (0.1Hz - 400Hz, sine, triangle, saw, rectangle, s&h, noise).
  • Filter and amplifier ADSR-envelope.
  • Free routable AD-envelope.
  • Mod-wheel and Pitch-Wheel support.
  • Midi Learn for all pots.
  • Velocity to filter contour intensity.
  • Panic button.
  • Tutorial.
  • Included factory presets - i'm shure, you do it better :-).

18.03.2009 - Release of TAL-USE alias TiltEq


After some trademark problems, TAL-TiltEq is now renamed to TAL-USE (Ultra Simple Eq). Also a bug with the RTAS adapter under OSX is fixed now.
  • New plugin name.
  • OSX RTAS Adapter issue fixed (GUI not responding)
Logic Pro users have to clear some cache files to get the new plugin name, but its not required.

13.03.2009 - TAL-TiltEq tredemark issue

The tilt eq isnt available anymore. TILT is a trademark of an other company. We have to change the name of this plugin. The plugin will be available as soon it has an other name.

05.03.2009 - Release of TAL-TiltEq


Release of TAL-TiltEq! An easy way to make a sound darker or brighter, without tweeking 100 knobs.

16.02.2009 - New Tal-BassLine presets by Risome from Syikom 

Tal-BassLine presets

07.02.2009 - Blog entry about TAL-Uno-62

A great blog entry about the Roland Juno family and TAL-U-No-62:


02.02.2009 - TAL-Vocoder Demo

djweissman.de made an interesting TAL-Vocoder demo song. This demo shows the vocoder with an external carrier signal from a Moog LP:

Vocoder Demo (Quick Time required)

08.12.2008 - TAL-Bitcrusher 1.0


Releases version 1.0 of TAL-Bitcrusher. Its a common bitcrusher with some useful additions. There is a low- and highshelf EQ and a noise